Best Way To Fix S4m Error

Stop wasting time with computer errors.

  • 1. Download and install the ASR Pro software
  • 2. Open the software and click "Scan"
  • 3. Click "Restore" to start the restoration process
  • Click here to download this software and fix your PC today.

    Recently, some of our users have reported that they are facing the s4m error.


    Ribbon may be loaded but this particular printer is set for cold weather.

    s4m error

    Solution:
    1. Tape is not required for direct temperature environment. If you are using Rapid Media Thermal. If you are producing direct thermal media, remove the ribbon when using it to avoid hitting the print head. This error message will never affect printing.

    2.If you are actually using thermal transfer media consisting of ribbons, set the printer to thermal transfer mode.

    loading×Sorry to interrupt youUpdate

  • Code: 01
  • Display: ALARM TAPE OFF
  • Description: The printer is erasing data and the WARNING light blinks.
  • Causes: In thermal transfer mode, the ribbon is not inserted and is inserted incorrectly. in thermometer settingsenos sensor does not detect a badly inserted tape. Thermally, in transfer mode, the media moves in front of the ribbon sensor. In thermal switch mode, the printer did not detect the ribbon although it was correctly loaded. When using direct thermal, the printer randomly waits for the ribbon to fill up because it is not set to thermal transfer mode correctly.
  • Remedy: Insert the sheet correctly. 1. Load the ribbon correctly. 2. Calibrate all sensors.1. Load media correctly. 2. Calibrate the sensor type. 1. Print a profile. See Sensor Pressure Profile on page 66. Ribbon end threshold (labeled RIBBON) is probably still high above the black area indicating the ribbon diagnostic location. 2. Calibrate the sensors and also load the default printer settings. See the Calibrate Paper Sensors page on page 67 and even the Load Factory Defaults page on page 64. Set the printer to thermal vertical mode. See the blog page “Set Ribbon Usage to 65”.
  • Code: 02
  • Display: WARNING TAPE ON
  • Description: The WARNING indicator flashes.
  • Cause: Ribbon loaded but printer set to Direct Thermal.
  • Remedy: Ribbon is not required for direct thermal media. If the audience is using direct thermal media, avoid using ribbon unless you are using this method to protect the print head. This error message does not affect printing. If you are using thermal media that requires ribbon, set the machine to thermal transfer mode. See Setting ribbon usage to 65.
  • Code: 03
  • Display: PAPER OUT OF ALARM
  • Description: Printer stops and ALERT low flashes.
  • Causes: The media is not inserted or is not properly packaged. The media sensor is misaligned. The manufacturer has installed continuous media, but the media will still boot continuously.
  • Solution: Insert the media correctly. Check the position of the media sensor. Install the correct media type or reset the photo printer p to the current media type and calibrate.
  • Code: 04
  • Display: HEAD OPEN SIGNAL
  • Description. The computer printer turns off and the WARNING light blinks.
  • Causes: The print head is not fully closed. The head opening sensor does not work properly.
  • Remedy: Close the print head completely. Replace sensor.
  • Code: 05
  • Display: HEAD TOO HOT WARNING
  • Description: Printer stops and ALERT easy flashes.
  • Causes. The print head has overheated.
  • Remedy: Allow the printer to cool down immediately. Printing will resume automatically once the printhead elements have cooled to an acceptable operating temperature.
  • Click here to download this software and fix your PC today.

    Il Modo Migliore Per Correggere L’errore S4m
    Beste Möglichkeit, Den S4m-Fehler Des Dienstes Zu Beheben
    Melhor Ferramenta Para Corrigir Erro S4m
    Meilleur Concept Pour Corriger L’erreur S4m
    Lo Mejor Para Corregir El Error S4m
    S4m 오류를 처리하는 가장 좋은 방법
    Bästa Sättet Att åtgärda S4m-fel
    Najlepszy Sposób, Jeśli Chcesz Naprawić Błąd S4m
    Лучший способ исправить ошибку S4m
    Beste Manier Om S4m-fout Op Te Lossen

    Recently, some of our users have reported that they are facing the s4m error. Ribbon may be loaded but this particular printer is set for cold weather. Solution:1. Tape is not required for direct temperature environment. If you are using Rapid Media Thermal. If you are producing direct thermal media, remove the ribbon when using…

    Recently, some of our users have reported that they are facing the s4m error. Ribbon may be loaded but this particular printer is set for cold weather. Solution:1. Tape is not required for direct temperature environment. If you are using Rapid Media Thermal. If you are producing direct thermal media, remove the ribbon when using…